UNLOCK YOUR LONGEST DRIVES

  • DRIVER

The new DX driver series is tailored to everyone's swing and skill.
All-round lineup fits all golfers.
It’s time to unlock your longest drives.

■ Material : HST160C Titanium (Face, Body) / Carbon (Crown)
■ Head size : 460cc
■ Country of Origin : Japan
■ Complimentary : Original head cover, Torque wrench

<CLUB SPEC>

<STORY>

The evolution of Fourteen’s driver has been by pursuing maximum distance through increased clubhead speed

Head speed is an essential element for distance. To maximize this physical element, Fourteen has been committed to long-length drivers and has thoroughly pursued distance performance. From the original "Gelong D" to the "Gelong D DX-001" released in 2022, the trajectory of Fourteen's drivers is all about "pursuit of clubhead speed."

Diversity of head performance required in the field of fitting

For the GelongD DX-001, which was released in 2022, we conducted many fittings at our own facility "14field" in Japan, as well as Demo Days and events held nationwide. The lightweight head with multiple weight adjustability met a wide range of needs, but we came to the conclusion that one head model alone cannot fully satisfy all golfers.

<DETAIL>

Two swing paths, two attack angles

Four "DX" driver heads lead to maximum distance

After many fittings, we noticed that golfers' swing patterns can be divided into four types. The New DX Driver range has been designed with optimal head shapes and center of gravities for the two paths and two attack angles. The latest driver series has finally arrived, one that can maximize the distance of all golfers.

Inside Out Swing Path

Two models with beautiful form and high performance. The stable path allows you to play them with long shafts, maximizing their potential.

Outside In Swing Path

Two new concept models,one forgiving and one low spin.

All-round lineup to fit all golfers.

To further increase distance, there are four types of heads to find the perfect fit.

Uncompromising pursuit of superior feel and sound

Two different kick points, three different weights
Original shafts designed to improve swing comfort and smash factor according to swing path and physical strength

F T- 6 / 5 / 4 dM

▸Mid-High kick point for comfortable swinging
▸Developed with Mitsubishi Chemical Corp.

Supports a smooth turn from the top of the downswing. Increased middle part rigidity ensures stable impact without excessive tip movement.

Shaft : Wt. /Torque *after cutting the shaft

FT – 6 d M ： 62 g / 4.0
FT – 5 d M ： 52 g / 4.4
FT– 4 d M ： 43 g / 5.2

* Mono flex

F T- 6 / 5 / 4 dG

▸Mid-Low kick point to increase clubhead speed
▸Developed with Graphite Design Corp.

The butt part is slightly firmer, making it easier to turn back from the top. The middle-tip section is softer, assisting in acceleration through impact.

Shaft : Wt. /Torque *after cutting the shaft

FT – 6 d G ： 63 g / 4.0
FT – 5 d G ： 54 g / 4.8
FT– 4 d G ： 45 g / 5.3

* Mono flex

By adjusting the loft and face angle, the spin rate, launch angle, and direction are optimized to further increase distance.
4 types of adaptors

Two original shafts are available in three weight ranges each. Furthermore, four types of adaptors allow for a total of 24 possible combinations. By adjusting the loft angle and face angle from ±0.5 degree to a maximum of ±2 degrees, it is possible to adjust the launch angle, spin rate, direction, and trajectory to suit each individual player.

< Loft, Lie, Face angle adjustability >

<FITTING>

For a comfortable swing feel

In order to experience the characteristics of each head accurately...
Select a shaft that matches your swing in the initial phase of fitting.
There are two shafts developed for two different swing types.
Start by checking which one gives you the best feel and smash factor.

Shaft fitting leads to optimal head selection

If the F T – d M shaft, which is suitable for draw hitters, feels better ... DX001, DX002
If the F T – d G shaft, which is suitable for fade hitters, feels better ... DX003, DX004
*Shaft options vary depending on fitting facility and region.

Let's start by trying out the new DX driver's core model "DX-002“.

For those who want to compare the DX Drivers to their current driver or other driver brands, or for those who want to see the performance of the new range, we recommend that you start by trying out the DX-002. For further fitting, such as optimizing spin rate and trajectory, there are three unique head models in the lineup in which to transition into.

For those who want to compare the DX Drivers to their current driver or other driver brands, or for those who want to see the performance of the new range, we recommend that you start by trying out the DX-002. For further fitting, such as optimizing spin rate and trajectory, there are three unique head models in the lineup in which to transition into.

Recommended order for head selection

Shaft fitting leads to optimal head selection

If the F T – d M shaft, which is suitable for draw hitters, feels better ... DX001, DX002
If the F T – d G shaft, which is suitable for fade hitters, feels better ... DX003, DX004
*Shaft options vary depending on fitting facility and region.

Weight screw positions

Each model has a different weight screw position to optimize for two swing paths and two attack angles. By adjusting the weight screw, further customization is available.

UNLOCK
YOUR LONGEST DRIVES